The Plan

Update 2017. While we hoped we could revive this project it has not happened. If anyone is interested in taking over, please leave a comment.


Knit lots of hats and scarves for patients and survivors or breast and ovarian cancers to be donated to the Komen Foundation for the Cure, Philadelphia Affiliate. We fully support monetary fund raising efforts for the cure. But we also want to do something which will go directly to those who need to know there are people rooting for their health and survival. All skill levels are welcome!

Please join us! The 2011 project ends Sept. 15th.

Showing posts with label third pattern. Show all posts
Showing posts with label third pattern. Show all posts

Sunday, June 12, 2011

The Third Pattern


Greetings! Here is the third pattern - the one on the logo. My great aunt helped me design this hat so I named it after her. She was 99 at the time. I've made this hat four times now and I change it every time, intuitively. So please let me know if you find there are problems with this pattern. It all makes perfect sense in my head... but that isn't very helpful when it doesn't make sense on paper!

Happy knitting!

Tante Ursel’s Hat (Aunt Ursula’s Hat)

Materials:

Yarn

Needles, circular and double points

Stitch holders

Tapestry needle

Stitch markers

Choose yarn of your choice and knit a sample swatch to establish gauge. Break off yarn and block.

Start knitting the braided rim.

Multiply your gauge (stitches per inch) by three. Cast on this amount. Knit the brim in a rib pattern as follows: knit all stitches in the gauge inch except for last stitch, purl this one. So if your gauge is 6st/inch. Knit 5, purl1, three times. Turn work, and on the back knit 1 purl 5, three times. Knit one inch of the rib.

Start knitting the braid. You will separate the band into three sections and knit I-chords. Place the stitches you are not working with on stitch holder or double pointed needle. Working with the first “rib” (including purled stitches) knit 7-8 inches of an I-chord. You will increase once stitch in the second row of the i-chord and in your last row you will decrease on stitch. I found that the cords need to “plump-up” a bit or they look a little spindly in the braid.

How to knit an i-cord: using double pointed needles, knit off the first rib. Work only with the first rib hold needle with all stitches on it in left hand – push all of the stitches to the right side of the double pointed needle. Bring the yarn around the back and knit the same stitches again. Never turn the work around, only push the stitches over. This will seem counter intuitive at first, but take a look at it from all sides after an inch or two and you will see that it all falls together nicely.

As you finish each i-cord, place the stitches onto a stitch holder or double pointed needle. With new thread, repeat with the following two ribs so that you now have three separate I-cords.

Braid these. Be careful not to braid to tightly or too loosely. Once braided, transfer all stitches back onto one needle. With a new piece of yarn, begin knitting in the rib pattern again.

Knit the brim to fit one inch less than the circumfrence of your head. Measure your head – if it is 21 inches – continue knitting in the rib pattern until the entire brim measures 20 inches.

Finishing the brim. For the pink hat on the logo, here’s what I did:

Do not bind off. Leave the stitches on the needle. Block the rim very well. This will establish the shape.Once the rim is blocked, use the Kitchener stitch to sew the rim together.

For all of the other hats I made in this pattern I did not block – I just Kitchener stitched together, and it worked fine without blocking.

Once the rim is in a circular shape, pick up stitches, one for each row of the hat. Place a marker at the beginning of the round. Note: this is not the correct amount to the rest of the hat!

Figure out how many stitches you want to end up with. (The text in pink is my example)

1. What is your gauge:_______ (6 stitches)

2. Circumference of your head:_________ (21 inches)

3. Multiply these to get the initial amount to go around your head_______ (126 stitches)

4. Count how many stitches you already have on the needle. __________(84 stitches) Subtract this amount from the amount in #3. _______ (126 – 84 = 42)This is how many stitches you need to increase in round two.

Round two: Increase _______ (42) spaced evenly around the brim. You can either knit in the front and back of the stitch, or pick up a stitch. I find the second technique a nicer look. To increase evenly. I should now have 126 stitches on my needles.

Round three: Increase the amount one more time. This hat should be a little loose so I chose to increase 3 more inches. Using my gauge – 3inches x 6stitches = 18 stitches to increase. Current number of stitches 126 plus increase stitches 18 = final total 144. The final amount of stitches on YOUR hat must be divisible by 6. This has nothing to do with my example gauge – it has to do with the multiples when we bind off the hat. So let’s say you wind up with 154 stitches. Increase to 156 so that the number of stitches is evenly divisible by 6.

Once round three is established, knit 5 inches.

Finishing:

Divide the number of stitches you have by 6_______ So for me: 144 divided by 6 = 24.

Round 1Knit the number of stitches above (24) and place a marker. Repeat all the way around. You should have 6 markers.

Round 2: *knit to 2 stitches before the marker. Slip each stitch off of the left needle onto the right needle one at a time, put the left needle back through the stitches and knit the two stitches together. (Ssk) Slip the marker to the right needle knit two together. Repeat from *

Round 3: knit

Round 4: as round two

Repeat the decrease row followed by a knit row until 12 sts. Remain. Cut thread and pull through remaining stitches to bind off.

One of our participants decided she didn’t want to do the decreases for the second hat. She just did the same bindoff as the first hat and it looks fabulous. I don’t know how that would look with this hat – probably fabulous, but if you would like to do that, you will probably need to knit more like 7-8 inches of the hat before binding off.


Three more pictures of the hats:


This last hat is a fun variation of the original. I will post what I did soon.

Friday, April 30, 2010

Week 4: Pattern 3 Blocks and Triangles

Hello All! Here we go with pattern 3. Pattern 3 comes from this book:It is available from Amazon here. We recommend purchasing this book - it is a fantastic "dictionary" of new patterns. Also the authors will be rewarded for their genious as they should be, and if you don't want another book lying around after this project, you can always donate it to your local public library. They would be thrilled to have it!

Alright - moving on. This is pattern #32 called Blocks and Triangles. Its fun and not as difficult as one might think. Here are images of the first two rows.side one.
side two.

Note: you will need one double pointed needle the same size or smaller as the needles you are currently using. For those of you who are new to knitting, a double pointed needle is pointed at both ends. It's usually used for knitting socks, and so they come five in one package. A cable needle would be fine instead as long as it is smaller than the needles you are using to knit.

I am re-writing this pattern to make it conform to our requirements.

To start: This pattern is multiple of 5, so we will maintain five stitches of our border rather than four. The pattern is designed for 20 rows. The first 10 have pictures. The second ten are almost the same, just reversing the order of the increases.

abbreviations:
p= purl
k=knit
yo=yarn over
dpn= double pointed needles
sts=stitches

row 1: work 5 stitches of border, (p4, k1) repeat 6 times, 5stitches of border
for all remaining rows work first five and last five stitches in border pattern.
row2: p1, yo, k4, repeat 5 times for a total of six repeats
To make a yarn over, take the yarn from the back of the needle and wrap it around the top of your needle. Keeping that loop in place, continue knitting as normal. Disclaimer: (again) I knit continental style (yarn in left hand), and I make things up as I go along - as long as things look good I keep going. So if this is wrong - someone please correct me! :)
row3: p4, k2, repeat 5 times
To knit the yarn overs - be sure to close the hole. Make sure the loop criscrosses. See below:
The yarn over as you come to it in knitting.

Insert right needle to the left of the loop.

You can see the start of the criscross. Knit now.

Finished stitch on the right needle.

row4: p2, yo, k4, repeat 5 times
row5: p4, k3, repeat 5 times
row6: p3, yo, k4 repeat 5 times
row7: p4, k4, repeat 5 times
row8: same as row 7

You should now have something which looks similar to the above. 5 border stitches on each side, and 48 stitches in the middle. The next step is to knit the 48 middle stitches down to 24. Here we go:

row9: work 5 border stitches, [slip next 4 stitches (sts) to double pointed needle (dpn). Hold the dpn to the back of the work (behind the regular needle you are using). Knit two stitches together using one stitch from the front needle and one from the back (dpn). Repeat for the next three pairs of stitches.] you have now overlapped the knitted and purled stitches. Repeat the pattern between the [ ] five times. Work 5 border stitches as normal.

Some more images of what everything should look like:
slipping stitches to the double pointed needle. To "slip a stitch" insert the dpn to the loop of the stitch on the left needle and transfer it to the dpn.

For the second repeat you will hold the dpn to the front of the work - both needles in the left hand. Try to line them up so that the points are even. To hold the dpn to the back do the same and hold them together in the left hand.


Knitting through both stitches, one on each needle.

After knitting the two stitches together, you should have double layers on the purl side. These are the last four stitches on the right hand needle. You will have an entire row of doubled up purls.

The second "row" of boxes and triangles:
row 10: k4, yo, repeat 5 times.
row 11: k1, p4, repeat 5 times.
row 12: k4, yo,p1, repeat 5 times.
row 13: k2,p4, repeat 5 times.
row 14: k4, yo, p2, repeat 5 times.
row 15: k3, p4, repeat 5 times.
row 16: k4, yo, p3, repeat 5 times.
row 17: k4, p4, repeat 5 times.
row 18: same as row 17.
row 19: work 5 border stitches, [slip next 4 sts to dpn. Hold the dpn to the front of the work. Knit two stitches together using one stitch from the front needle and one from the back. Repeat for the next three pairs of stitches.] Repeat the pattern between the [ ] five times. Work 5 border stitches.

row 20: yo, k4, repeat 5 times.

At this point I recommend repeating rows 1 - 9 only, so that we have three rows of blocks and triangles. For my yarn that will give me a 4 inch swatch. However - nothing is set in stone, if you wish to do the full repeat - please do. However - you will want to finish with row 9 or 19.

Hope everything is clear - please be in touch if it's not! Happy knitting!